Name: Lithographic Presses JL
SKU: 32883
Availability: BackOrder

Lithographic Presses JL

£3,515.00 – £4,400.00

The pressure is exerted on the stone by means of a lever in the upper part of the press, through a “knee joint mechanism”. The height of the scraper bar can be adjusted and blocked. The bed with the stone is crossed under the stone by turning the crank. The crank can be disconnected when the plateau is pulled back.

The press is equipped with a paper support as standard and 1 plastic tympan is included. A 1 mm thick PVC sheet is used as a tympan. The bed is made of 4 cm thick glued plywood, waterproof, provided with a “rubber layer” on top.

JL50

Press dimensions:
Length of the frames	170 cm	67″
Length (maximum including bed)	194 cm	76″
Width (total)	102 cm	40″
Height (with lever up)	204 cm	80″
Max. stone size	52 x 62 cm	20″ x 24″
Max. thickness of the stone	12 cm	4.7″

JL70

Press dimensions:
Length of the frames	235 cm	93″
Length (maximum including bed)	274 cm	108″
Width (total)	122 cm	48″
Height (with lever up)	214 cm	84″
Max. stone size	72 x 102 cm	28″ x 40″
Max. thickness of the stone	12 cm	4.7″

JL80

Press dimensions:
Length of the frames	258 cm	102″
Length (maximum including bed)	297 cm	117″
Width (total)	132 cm	52″
Height (with lever up)	219 cm	86″
Max. stone size	82 x 114 cm	32″ x 45″
Max. thickness of the stone	12 cm	4.7″